CERESIT CT 49 | Nano-silicone-based paint

- CERESIT CT 49 may be applied to load-bearing, smooth, dry and clean substrates. Uneven and damaged foundations must first be repaired. Any existing dirt, low-strength layers, saline and adhesive paint coatings, as well as any wallpaper or adhesive residues, must be completely removed. After washing with water, the surface must be allowed to dry.

- Before applying the paint, the contents of the container should be thoroughly mixed using a drill-mounted mixer for approximately 2 minutes. Technical breaks of at least 12–24 hours must be observed between the application of successive coats. CERESIT CT 49 must be applied evenly using a brush, roller or spray.

- Application must take place in dry conditions at an ambient and substrate temperature of between +5 °C and +25 °C and a relative humidity of less than 80 per cent. The paint may cause discolouration that is impossible to remove from glass, ceramic, wooden, metal and stone surfaces. Skin and eyes must be protected. When applying the paint, you must wear protective gloves and goggles.