CERESIT CM 29 EXPRESS | C2FTE

- CERESIT CM 29 adheres to all clean, solid, load-bearing, flat, dry and damp substrates on which there are no substances that could reduce adhesion. Uneven areas or depressions must be levelled beforehand.

- Pour the contents of the packet into a measured quantity of clean, lukewarm water and mix using a drill-mounted mixer until a homogeneous, lump-free mixture is obtained. You should then wait 5 minutes (for it to set) and stir again. If necessary, carefully add water until the desired consistency is achieved.

- The adhesive is applied using a suitable notched trowel, depending on the size of the tile in question. When used indoors, the back of the tile (contact area) must be covered with adhesive to at least 65 per cent. For outdoor use, the minimum mortar coverage should be 90 per cent (the combined installation method should be used, i.e. a thin layer of adhesive should also be applied to the back of the tile). CERESIT CM 29 sets quickly – the reduced film-forming time and setting time compared with standard hardening tile adhesive should be taken into account.