CERESIT CT 84 | Low-expansion polyurethane foam

- CERESIT CT 84 adheres very well to mineral surfaces. In the event of low temperatures, the surfaces to which CERESIT CT 84 is applied must be protected from freezing. The adhesion of existing render and paint coatings should be checked in advance. Any surface contaminated with other non-adhesive substances, or surfaces with poor adhesion to the substrate, must be removed.

- Shake the tube vigorously for a few seconds, then remove the valve cap and, next, screw on the application gun so that the cartridge is positioned below the valve. The valve opens when turned. Once you have screwed on the application gun, the valve opens and the adhesive can be dispensed by pressing the trigger. CERESIT CT 84 must be applied using the gun so that the cartridge is positioned below the valve. When installing polystyrene boards over existing thermal insulation, CERESIT CT 84 is applied around the perimeter.

- CERESIT CT 84 adhesive allows the temperature to drop below 0°C within 8 hours of application. It contains substances that are harmful to health. When applying the product, it is recommended that you wear safety goggles and protective gloves. The cylinder contains compressed flammable gas; therefore, keep it away from sources of heat and do not store it at temperatures above +50°C. The cylinder must not be pierced or thrown into a fire.