ESHASTICK P-P | Self-adhesive elastomeric bituminous waterproofing membrane

Basements & foundations

- Waterproofing of concrete basement walls

- Vertical surfaces with mechanical fixing of the upper edge every 3 m

- Foundations & elements in contact with the ground

Flat roofs & insulating substrates

- Waterproofing of flat roofs beneath the thermal insulation (inverted insulation)

- Flat roof waterproofing over thermal insulation

- Directly onto rigid polyurethane (PU) slabs

- Directly onto XPS (XPS)

- As a primary waterproofing layer onto which bituminous membranes can subsequently be torch-applied

Special substrates & mesh

- Metal surfaces & structures

- Timber surfaces (pitched tiled roofs, timber roofs)

- Metal pipes — waterproofing & corrosion protection

- Concrete pipes

High-risk environments

- Storage facilities for flammable materials & fuels

- Industrial facilities where open flames are prohibited

- Areas with timber load-bearing structures

- Projects in occupied buildings where the blowtorch poses a hazard

System-level note: Surfaces must be smooth, dry and free from dust, oil or rust; substrate moisture content ≤6%; priming with ESHALAC 50S is mandatory (diluted with petrol — metal surfaces 150–250 g/m², concrete 250–300 g/m²); gradual removal of the silicone film during installation; overlaps ≥5 cm along the length / 15 cm at the top (different from torch-on at 8/12 cm); waterproofing using an 8 kg Roller Pressure Seamer; application temperature >5°C.