CERESIT CM 49 PREMIUM FLEXIBLE | C2TES2

- CERESIT CM 49 adheres to all clean, solid, load-bearing, flat, dry and damp substrates on which there are no substances that could reduce adhesion. Uneven areas or depressions must be levelled beforehand. Use CERESIT CT 19 to prime non-absorbent substrates. Freshly laid, clean cement screeds (3–5 days after laying) do not require priming before the floor covering is laid.

- Mix CERESIT CM 49 with clean water and stir until the mixture is completely free of lumps. Leave the mixture to stand for approx. 5 minutes, then stir again. If necessary, add small amounts of water until the desired consistency is achieved.

- Apply CERESIT CM 49 using one of two methods: Buttering-Floating or Buttering-Buttering. Allow approx. 40 minutes for a skin to form. Use a trowel with the correct tooth size to ensure the tiles are laid tightly – without any gaps.