CERESIT CR 166 Flexible 2-K | Flexible cementitious waterproofing compound

SCOPE OF APPLICATION

- Tanks and swimming pools up to 5 m deep

- Drinking water tanks — internal waterproofing

- Deformable and cracked substrates

- Roof terraces and floors with underfloor heating

- Internal damp areas, garages, columns, bridges

- Horizontal damp-proof course, with reinforcement fabric

The mixing sequence is important: component B is added to the container first, followed by water if required, and finally component A, whilst stirring with a low-speed mixer. Leave to stand for 5 minutes and stir briefly again. For brush or spray application, the ratio is 24 kg of A to 8 L of B plus 2 L of water; for trowel application, use without water.

Always apply the first coat generously with a brush to a damp but not wet substrate. Apply subsequent coats diagonally, after approximately 3 hours. Each coat should not exceed 1.5 mm. To protect the reinforcement, the coating must extend at least 0.5 m beyond the area to be protected.

Protect for 3 days from rapid drying, frost and precipitation — do not wash off.

Walkable after 3 days, tiling after 3 days, painting after 5 days. In storage: Component B must not be allowed to freeze.