CERESIT CT 110 SOLAR PROTECT

CERESIT CT 110 can be applied to durable, smooth, dry and clean substrates. Any uneven or damaged substrates must be repaired first. It is recommended that you check the strength of existing mineral coatings. Any existing dirt, low-strength layers, lime and adhesive paints, as well as any wallpaper or adhesive residues, must be completely removed.

Before applying the paint, the contents of the container should be stirred thoroughly using a drill-mounted mixer for approximately 2 minutes. A curing time of at least 12 to 24 hours must be observed between the application of successive coats. CERESIT CT 110 should be applied evenly using a brush, roller or spray equipment. Application by spraying using pressure equipment is possible.

Application must be carried out in dry conditions, with the ambient and substrate temperatures ranging from +5 to +25°C and humidity below 80 per cent. The paint may cause discolouration that is impossible to remove. Consequently, all items coming into contact with CERESIT CT 110 must be protected. Skin and eyes must be protected. When applying the paint, protective gloves and goggles must be worn.