CERESIT R 766 | Multi-purpose floor primer

Scope of Application

Adhesion primer for use beneath Ceresit self-levelling compounds on cement screeds and sulphate-based screeds, concrete, old levelling compounds, plasterboard, sandless mastic, stone and ceramic tiles, wooden planks and V 100 chipboard. It is also used as a primer prior to the direct bonding of vinyl, LVT, linoleum, carpet and wooden flooring. It must not be applied over residues of water-soluble adhesives or soft bituminous adhesives, nor under elastic wood adhesives.

System note

Substrate must be clean, stable and permanently dry → sand and sweep → CERESIT R 766, diluted according to the substrate → self-levelling compound CERESIT DA (2–10 mm), CN 76 (4–50 mm) or DH Maxi (3–30 mm) → UZIN 398-D adhesive for vinyl, LVT and carpet (CERESIT UK 400 for domestic CV vinyl), CERESIT P 625 for parquet. Where residual moisture is present: apply CERESIT R 755 first, followed by R 766 undiluted. Conditions: floor > +15 °C, ambient air > +18 °C, RH < 75 per cent. Do not leave puddles of primer.