SINMADUR QUICK PASS | Aliphatic Polyurea Coating in Any RAL Colour

Field of Application

Concrete floors and walls, industrial floors, logistics and storage areas, car workshops and car parks, shops and shopping centres, pharmaceutical warehouses, walls subject to frequent washing and disinfection, steel and galvanised surfaces. Renovation of kitchens, bathrooms and utility rooms over existing tiles.

System Note

On concrete (≥ 28 days old, ≥ 22 MPa, moisture ≤ 4 %): SINMAST S2 WB or MULTIPRIMER PU primer, followed by two coats of QUICK PASS. Over tiles the sequence is strict. First check that the tiles are firmly bonded, level and dry, with no trapped moisture. Then clean and degrease thoroughly and seal the grout joints with TECNOSEAL 96. Next, wipe on SINTECNO TILE PRIMER with a cloth (50–80 g/m²), section by section. Apply the first coat of QUICK PASS to each section from 15 minutes up to 1 hour later, then the second coat. The mixed material has a pot life of about 1 minute: mix small quantities, pour onto the surface immediately and spread with a roller without interruption. Substrate temperature +5 to +35 °C, relative humidity ≤ 70 % when priming with TILE PRIMER.