SINROC DECO FLOORING | Decorative Self-Levelling Epoxy Floor with a Granite Look

Field of Application

Shops, hypermarkets and shopping centres, reception areas, offices, exhibition spaces, schools, industrial and concrete floors in indoor areas. Applied on concrete, cement screeds, polymer levelling layers and epoxy or polyurethane resin mortars.

System Note

The substrate must be ≥ 28 days old, ≥ 22 MPa, with pull-off strength ≥ 1.5 MPa and moisture ≤ 4 %. Check flatness with a laser. Then prepare the surface mechanically by milling or closed-circuit shot blasting, and fill local defects 24 hours beforehand with SINMAST P103 or S2 mixed with quartz sand. Next, apply SINMAST S2 primer (0.250–0.300 kg/m²), or S2 Wet on Wet on damp substrates, and within 12–24 hours spread SINROC DECO with a notched trowel or adjustable gauge rake. Immediately afterwards, pass a spiked roller in both directions to even out the thickness and release trapped air. Do not thin the material or add aggregates. Temperature +8 to +30 °C, relative humidity ≤ 75 %, and protect from water for the first 24 hours.