
VANDEX SUPER | Penetrating crystalline concrete waterproofing agent
Cementitious waterproofing mortarsDescription
VANDEX SUPER is not a coating. It is a cementitious material that waterproofs concrete in depth: its active chemicals react with the free lime and moisture in the pores to form insoluble crystals, which seal the capillaries and shrinkage micro-cracks. The result is not on the surface of the concrete — it is inside it.
This gives it a capability that no membrane possesses: it works even under negative hydrostatic pressure, that is, when water is pushing from the soil side towards the structure. It is used in waterproof basement envelopes, raft slabs, retaining walls, construction joints, tunnels, sewage treatment plants and drinking water reservoirs — it has been tested and approved for this use.
It waterproofs without trapping moisture: the concrete continues to breathe. And it remains permanently active — if a new micro-crack appears and water penetrates, new crystals form to seal it. Below you will find the full technical specifications, consumption rates per structural element and the application conditions that determine whether the system will work.
It is the only material in the catalogue that requires a damp substrate — every liquid-applied membrane requires a dry one. The reason is that this is not a coating: it becomes part of the concrete. It does not get punctured by backfill, does not peel away, and remains permanently active — new water in a new crack forms new crystals.
The trade-off: it requires a sound, open-pored system. It does not rectify poor-quality concrete.
Overview
Key Features
- Deep waterproofing by crystallisation — not a surface coating
- Effective under both positive AND negative hydrostatic pressure
- Permanently active: new water entering a new micro-crack forms new crystals
- Approved for contact with drinking water
- The concrete remains vapour-permeable — no moisture is trapped
- Compressive strength of 39 MPa and bond strength of 1.4 MPa at 28 days
- Protection against seawater, sewage and aggressive groundwater
- Non-combustible — Class A1 according to EN 13501-1
- Application by brush, spray or dry brushing with a helicopter
- CE marking in accordance with EN 1504-3, with BBA and NSF certifications
Where it is used
Technical solutions where this material is used.
- Cementitious waterproofing mortarsTechnical Guide: Waterproofing a Concrete Swimming PoolView the solution
- Cementitious waterproofing mortarsWaterproofing of a Concrete Tank: Drinking Water, Certifications and the Correct SystemView the solution
- Cementitious waterproofing mortarsWaterproofing of Basement Floors (Radier) with a Rising Water TableView the solution
Related Products
VANDEX PLUG | Fast-setting sealant for active leaks
Category: Cementitious waterproofing mortars
VANDEX UNIMORTAR 1 | Waterproofing and repair mortar
Category: Cementitious waterproofing mortars
ESHAHYDROBENT | Water-swelling bentonite cord - waterstop
Category: Joint sealing and waterstops
VANDEX BB 75 | 1C Cementitious Waterproofing Render
Category: Cementitious waterproofing mortars




