FIBRANxps INCLINE | Creating slopes
Extruded polystyrene (XPS)Description
FIBRANxps INCLINE XPS sloped panels feature a slope of between 0.5% and 3% on one surface and provide the necessary drainage slopes on the flat roof whilst also providing thermal insulation. They are manufactured in accordance with EN 13164 and EN 13172 and comply with Regulation 305/2011 (CPR).
The slope is ‘built’ into the insulation. This replaces the heavy sloped screed used for slopes: the permanent load on the slab is reduced, installation is speeded up, and a dry, waterproof substrate with high mechanical strength is achieved in a single layer.
Overview
Key Features
- Falls of 0.5%–3% and thermal insulation in one layer
- High compressive strength (CS(10) up to 300 kPa) and tensile strength
- Water-resistant — very low water absorption, stable in wet conditions
- Lightweight, easy to cut and install
- 100% recyclable · ODP = 0 · GWP = 0 · CFC/HCFC-free
Where it is used
Technical solutions where this material is used.
- Extruded polystyrene (XPS)Applications & Solutions Guide: FIBRANxps MAESTROView the solution
- Thermal insulation materialsETICS system with XPSView the solution
- Extruded polystyrene (XPS)Insulation for cold rooms: flooring, vapour barrier and frost-free freezing in the insulationView the solution
- Extruded polystyrene (XPS)Tapered flat roof insulationView the solution
Related Products
ESHAGUM ANTIROOT B5 -10°C | Bituminous root-resistant membrane
Category: Specialised bituminous membranes
MAXISTUD F | 20mm HDPE dimpled drainage membrane
Category: Drainage
ESHASTICK PG | Self-adhesive bituminous membrane
Category: Specialised bituminous membranes
ESHA UNIVERSAL | POCB polyolefin elastomeric waterproofing membrane
Category: Synthetic membranes